Heatit 7S Thermostat
The Heatit 7S is an electonic thermostat with four functions. The thermostat is easy to install and program, and the simple design makes it very user-friendly. It is available both in black and white, and with two different frame designs.
The Heatit 7S is equipped with a single-pole switch. The thermostat can handle loads up to 16A/3600W at 230V. If the load is greater than this, the thermostat needs to be connected to a contactor. It may be used with two external temperature sensors.
The thermostat is designed for electrical heating.
CUSTOM COLOR COMBINATIONS
Due to the fact that many of our thermostats are available both white and black, you may combine frames and fronts as you please. Choose a black frame with a white front (or the other way around) for an edgy look, or go for the traditional all-white or all-black.
- Floor sensor
- External room sensor
- Temperature limiter
- Power regulator
- Power saving mode
- Setback via pilot wire
- 7-segment LCD-screen
- May be used in connection with different NTC-sensors
- Lock mode/child lock
Rated voltage 230V 50/60Hz
Max load 3600W (resistive load)
750W self-limiting heating cable
Max current 16A
Power consumption 1,5W
Power regulator Time cycle 0 – 30min
Min/max installation temp -20°C – 40°C
Min/max operating temp 5°C – 40°C
Temperature intervals Floor sensor: 5°C – 40°C
Room sensor: 5°C – 40°C
Hysteresis 0,3°C – 3,0°C (default 0,5°C)
0°C 29,1 kΩ
10°C 18,6 kΩ
15°C 15,1 kΩ 20°C 12,2 kΩ
25°C 10,0 kΩ
Switch Single-pole switch
Included in package Floor sensor, Ø4mm 3 meters NTC 10 kΩ,
Art. no. 54 301 09
Compatible with NTC
sensors with values 10, 12, 15, 22, 33 and 47 kΩ @ 25°C
IP-class IP 21
Use 1,5mm² or 2,5mm² according to load.
|Art. no.||Art. no.||Product||Z-Wave frequency|
|99 304 55||99 304 98||Heatit 7S thermostat 3600W 16A||EU 868,4 MHz|
|99 304 56||Heatit 7S plastic kit|
|54 301 08||Floor sensor Ø3mm 6m NTC 10 kΩ|
|54 301 09||Floor sensor Ø4mm 3m NTC 10 kΩ|
|54 301 28||External room sensor NTC 10 kΩ|
|54 304 71||External enclosed sensor IP 20/54|
The product must be installed in accordance with the current version of the installation guide and national building codes. See the installation guide for further information.