Available
January 1 st 2018

Heatit Z-Therm2

The Heatit Z-Therm2 is an electronic thermostat for floor heating in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Future Home, Smarthings, Homeseer, Vera, Zipato etc.

The Heatit Z-Therm2 is equipped with a single pole switch and fits most System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat must control a contactor. The thermostat may be connected to two wired external sensors.

The thermostat has the capacity of up to 8 associations (relays, wall plugs etc.)

The thermostat is designed for electrical heating.


   

CUSTOM COLOR COMBINATIONS

Due to the fact that many of our thermostats are available in both white and black, you may combine frames and fronts as you please. Choose a black frame with a white front (or the other way around) for an edgy look, or go for the traditional all-white or all-black.

Heatit_z_wave_white-white

Heatit Z-therm2 White RAL 9003

Color and design matching the Schneider Exxact series.

Heatit_z_wave_White-Front-Black
Heatit_z_wave_black-front-white
Heatit_z_wave_Black-Black

Heatit Z-Therm2 RAL 9011

Design matching the Schneider Exxact series.

Features

  • Floor sensor
  • External room sensor
  • Built-in room sensor
  • Temperature limiter
  • Power regulator
  • Z-Wave Plus chip, 500 series
  • Weekly program/setback mode via gateway or pilot wire
  • Firmware updates (OTA)
  • Power metering
  • LED-diode
  • Can be used in connection with different NTC-sensors
  • Lock mode/child lock
  • Backlight
  • Calibration
  • 8 associations
  • Multilevel sensor command class
  • Supports encryption mode: S0, S2, Access Control Class
    S2 Authenticated Class, S2 Unauthenticated Class

Technical data

Protocol Z-Wave Plus (Pending Certification) – 500 Series
SDK 6.71.00
Rated voltage 230V  50/60Hz
Max load 2900W (resistive load)
750W self-limiting heating cable
Max current 13A
Power consumption 2,0W
Power regulator Time cycle 0 – 30min
Min/max installation temp -20°C – 40°C
Min/max operating temp 5°C – 40°C
Temperature intervals
Floor sensor 5°C – 40°C
External room sensor 5°C – 40°C
Hysteresis 0,3°C – 3,0°C (default 0,5°C)
Switch Single-pole switch
Included in package Floor sensor  Ø4mm  3 meters  NTC 10 kΩ, Art. no. 54 301 07
Compatible with NTC sensors with values
10, 12, 15, 22, 33 and 47 kΩ @ 25°C
IP Class IP 21
Colors White RAL 9003
Black RAL 9010

Terminal

Use 1,5mm² or 2,5mm² according to load.

WARRANTY

2 years

Dimensions

Heatit Z-Therm2 Dimensions

Download documents

White Black
Art. no. Art. no. Product Z-Wave frequency
99 305 99 99 305 89 Heatit Z-Therm2 thermostat  2900W  13A EU 868,4 MHz
99 305 98 99 305 88 Heatit Z-Therm2 thermostat  2900W  13A BR 921,4 MHz
99 305 97 99 305 87 Heatit Z-Therm2 thermostat  2900W  13A US 908,4 MHz
99 305 96 99 305 86 Heatit Z-Therm2 thermostat  2900W  13A RU 869 MHz
99 305 95 99 305 85 Heatit Z-Therm2 thermostat  2900W  13A US2 916 MHz
99 305 94 99 305 84 Heatit Z-Therm2 thermostat  2900W  13A IND 865,2 MHz

Sensors

Art. no. Product
54 301 08 Floor sensor  Ø3mm  6 meters  NTC 10 kΩ
54 301 07 Floor sensor  Ø4mm  3 meters  NTC 10 kΩ
54 301 28 External room sensor  NTC 10 kΩ
54 304 71 External enclosed sensor  IP 20/54

The product must be installed in accordance with the current version of the installation guide and national building codes. See the installation guide for further information.

© 2017 Heatit Controls
Heatit Controls is owned by Thermo-Floor AS – Norway