Heatit Z-Water front

Available
November 1st 2017

Heatit Z-water

Regulator for hydronic heating systems

Heatit Z-Water is a DIN-rail regulator for controlling hydronic heating.

Heatit Z-Water is a module that clips right onto a DIN rail to add a variety of functions to your wireless Z-Wave network.
Heatit Z-Water is equipped with 10 relay outputs and it has 4 analog/digital inputs, and a Z-Wave radio for interfacing to the wireless Z-Wave network. The module can be power supplied from a 230V AC mains connection, and is able to deliver an output supply of 24V DC. Heatit Z-Water relay outputs are able to be freely controlled from the Z-Wave network, and can be used for several purposes, e.g. on/off control of light, control of valve actuators for an underfloor heating system, or control of other home automation systems.

Heatit Z-Water analog/digital inputs (different firmware versions) can be configured to work with different functionality and can be connected to potential free contacts, open-collector outputs, and will be able to control other Z-Wave devices; switches, dimmers, etc. Furthermore, the inputs can be used as a Scene Controller and send Central Scene notifications to the Z-Wave gateway.
It is possible to configure the level and the indication of the status indicator LED in the front of the Heatit Z-Water module.


      

Features

  •  The relay outputs may be used for controlling actuators/valves in a hydronic heating system
  • May be used to control both 24V actuators and 230V actuators
  • Analog/digital inputs (different FW versions)
  • Can be used together with a Heatit Z-Temp sensor in each zone
  • DIN rail mounting
  • Works as a Z-Wave repeater
  • Compatible with Z-Wave and Z-Wave Plus gateways
  • Firmware updates (OTA)
  • Available firmware versions (analog/digital inputs)
  • Supports encryption mode: S0, S2 Access Control Class,
    S2 Authenticated Class, S2 Unauthenticated Class

Dimensions

Heatit Z-Water Dimensions

technical data

Protocol Z-Wave Plus (Pending Certification) – 500 Series
SDK 6.71.00
Rated voltage 100V-240V  50/60Hz
Power consumption 0.6W standby
Fuse 3.15A Quick-Acting, UMF 250
Schurter Inc., part no.: 3405.0171.11
24V DC output Maximum 1.17A, 28W
Relay outputs Rated carry current: 5A
Max. switching voltage: 250V AC, 30V DC
Max. switching current: 5A
Max. switching power: 1,250 VA, 150W
Inputs Max. input voltage: 10V DC
Input impedance: 10 KΩ
Loop output voltage: 5V DC
Explorer frame supp. Yes
Device type Slave with routing capabilities
Generic device class Binary Switch
Specific device class Valve Open Close
Routing Yes
FLiRS No
Z-Wave Plus Yes
Approvals CE
EN 50491-3: 2009
EN 60669-2: 2004

Warranty

2 years

Download documents

art. no. Product Z-Wave frequenCY
99 124 20 Heatit Z-Water – regulator for hydronic heating systems EU 868,4 MHz
99 124 21 Heatit Z-Water – regulator for hydronic heating systems BR 921,4 MHz
99 124 22 Heatit Z-Water – regulator for hydronic heating systems US 908,4 MHz
99 124 23 Heatit Z-Water – regulator for hydronic heating systems RU 869 MHz
99 124 24 Heatit Z-Water – regulator for hydronic heating systems US2 916 MHz
99 124 25 Heatit Z-Water – regulator for hydronic heating systems IND 865,2 MHz

The product must be installed in accordance with current version of the installation guide and national building codes. See the installation guide for further information.

© 2017 Heatit Controls
Heatit Controls is owned by Thermo-Floor AS – Norway