Heatit RCD Thermostat

The Heatit RCD is an electronic thermostat with a floor sensor. It has been developed with special consideration to easy mounting and a user-friendly interface.

The thermostat has a built-in RCD. A floor sensor is included, but it may also be combined with an external room sensor. This thermostat is ideal for renovations and installations where an RCD has not been installed.

The operation of the thermostat is very simple, with an on/off switch, an RCD reset button and a temperature dial.


  • Floor sensor
  • RCD – Residual current disruptor



Note: Updated drawings are coming at a later time.
Please contact us for further information regarding dimensions and sizes.

Technical data

Rated voltage 230V 50/60Hz
Max load 2760W (resistive load)
Max current 13A
Sensitivity 30m A, type A
Temperature range ± 5°C – 35°C
Min/Max temperature 0°C – 30°C
Sensor NTC 10 kΩ
Sensor length 3 meters
Switch 2-pole-switch
IP class IP 21
Int. standard EN 60730-1, EN 60730 2-9,
IEC 62640


Use 1,5mm² or 2,5mm² according to load.


  • Green light when the thermostat is in stand-by mode
  • Constant red light when the relay is operational and the power is on
  • Flashing red light if the sensor is malfunctioning or disconnected


2 years

Art. no. Product Color
99 301 12 Heatit RCD thermostat  2760W  12A White  RAL 9010
54 301 08 Floor sensor  Ø3mm  6m  NTC 10 kΩ
54 301 09 Floor sensor  Ø4mm  3m  NTC 10 kΩ
54 301 29 External room sensor, mini,  NTC 10 kΩ

The product must be installed in accordance with current version of the installation guide and national building codes. See the installation guide for further information.

© 2018 Heatit Controls
Heatit Controls is owned by Thermo-Floor AS – Norway