Heatit s-control

The Heatit S-Control is an electronic thermostat with four functions. The thermostat is easy to install and program, and the simple design makes it very user-friendly. The thermostat has a setback temperature option.

Heatit S-Control is equipped with a 2-pole switch, and fits Elko RS16, Schneider Exxact and Eljo frames, et. al.

The thermostat is designed for electrical heating.


Due to the fact that many of our thermostats are available both white and black, you may combine frames and fronts as you please. Choose a black frame with a white front (or the other way around) for an edgy look, or go for the traditional all-white or all-black.

Heatit_s-control Schneider (R) frame white

Heatit S-control White RAL 9003

Color and design matching the Schneider Exxact series.

Heatit_s-control_ELJO frame white

Heatit S-control White RAL 9010

Color and design fits into the Eljo frame.

Heatit_s-control Schneider (R) frame black

Plastic kit

for Heatit S-control thermostat Black RAL 9011


  • Room sensor
  • Floor sensor
  • Power regulator
  • Temperature limiter



Note: Updated drawings are coming at a later time.
Please contact us for further information regarding dimensions and sizes.

Technical data

Rated voltage 230V 50/60Hz
Max load 3600W (resistive load) 750W self-limiting heating cable
Max current 16A
Power consumption 0,5W
Power regulator Time cycle 0 – 30min
Min/max installation temp -20°C – 60°C
Min/max operating temp 0° – 40°C
Temperature intervals Floor sensor: 5°C – 40°C
Room sensor: 5°C – 40°C
Hysteresis 0,5°C
Sensor values
0°C 29,1 kΩ

10°C 18,6 kΩ
15°C 15,1 kΩ
20°C 12,2 kΩ
25°C 10,0 kΩ
Switch 2-pole-switch
Included in package Floor sensor, Ø4mm 3 meters NTC 10 kΩ, Art. no. 54 301 09, Cover
Compatible with NTCsensors with values 10, 12, 15, 22, 33 and 47 kΩ @ 25°C
IP class IP 21
Terminal Use 1,5mm² or 2,5mm² according to load.


  • Green light when the thermostat is in stand-by mode
  • Constant red light when the relay is operational and the power is on
  • Flashing red light if the sensor is malfunctioning or disconnected


2 years

Art. no. Product Color
99 30 333 Heatit S-Control thermostat  3600W  16A White  RAL 9010
99 303 44 Heatit S-Control thermostat  3600W  16A White  RAL 9003
99 304 48 Plastic kit for Heatit S-control thermostat Black  RAL 9011
54 303 11 Frame for Heatit White  RAL 9003
54 303 12 Frame for Heatit Black  RAL 9011
54 301 08 Floor sensor  Ø3mm  6m  NTC 10  kΩ
54 301 09 Floor sensor  Ø4mm  3m  NTC 10  kΩ
54 301 28 External room sensor  NTC 10kΩ
54 304 71 External enclosed sensor  IP 20/54

The product must be installed in accordance with the current version of the installation guide and national building codes. See the installation guide for further information.

© 2020 Heatit Controls