Multifunctional flush thermostat with LCD display
The Heatit LCD2 is an electronic thermostat for flush mounting in a standard wall box. The Heatit LCD2 is equipped with a 2- pole switch, and fits Elko RS16, Schneider Exxact and Norvesco frames, et. al.
The thermostat is designed for electrical heating.
CUSTOM COLOR COMBINATIONS
Due to the fact that many of our thermostats are available both white and black, you may combine frames and fronts as you please. Choose a black frame with a white front (or the other way around) for an edgy look, or go for the traditional all-white or all-black.
- Room sensor
- Floor sensor
- Temperature limiter
- Power regulator
- Weekly schedule
- Setback via pilot wire
- May be used in connection with different NTC-sensors
- Lock mode/child lock
Rated voltage 230V 50/60Hz
Max load 3600W (resistive load) 750W self-limiting heating cable
Max current 16A
Power consumption 0,5W
Power regulator Time cycle 0-30min
Min/max installation temp -20°C to 60°C
Min/max operating temp 5° C to 50°C
Floor sensor 5°C to 60°C
Room sensor 5°C to 40°C
0°C 29,1 kOhm
10°C 18,6 kOhm
15°C 15,1 kOhm
20°C 12,2 kOhm
25°C 10,0 kOhm
Included in package Floor sensor,Ø4mm 3 meters NTC 10 KΩ, Art. no. 54 301 09
Compatible with NTCsensors with values 10, 12, 15, 22, 33 and 47 kΩ @ 25°C.
IP class IP21
Use 1,5mm² or 2,5mm² according to load.
|99 303 01||Heatit LCD2 thermostat 3600W 16A||White RAL 9010|
|99 304 01||Heatit LCD2 thermostat 3600W 16A||White RAL 9003|
|99 304 49||Plastic kit for Heatit LCD2 thermostat||Black RAL 9011|
|54 303 11||Frame for Heatit||White RAL 9003|
|54 303 12||Frame for Heatit||Black RAL 9011|
|54 301 08||Floor sensor Ø3mm 6m NTC 10 kΩ|
|54 301 09||Floor sensor Ø4mm 3m NTC 10 kΩ|
|54 301 28||External room sensor NTC 10 kΩ|
|54 304 71||External enclosed sensor IP 20/54|
The product must be installed in accordance with the current version of the installation guide and national building codes. See the installation guide for further information.