Heatit Z-Push Button 2
Product number: 45 125 80
Heatit Z-Push Button 2 is a battery operated wall switch with 2 push buttons. The switch enables you to control the Z-Wave-products in your smart home system. Managing your Z-Wave products becomes easy and practical. The switch can be set up to control scenarios or work in associations with other Z-Wave products.
Heatit Z-Push Button 2 can control 1association group with up to 5 products or 4 scenarios through your gateway. Heatit Z-Push Button 2 may not be used as a stand-alone
unit; it must be included in a gateway to function. The switch fits into standard Elko, Schneider Exxact and Gira System 55 frames. The switch is easy to installed, and may be fastened with
screws or double-sided tape.
GIRA® is a trademark of GIRA Giersiepen GmbH & Co.
- Battery operated wall switch
- Fits Gira System 55, Elko RS-16 and Schneider Exxact
- Controls 1 group and up to 5 units
- Controls 4 scenarios via your gateway
- Easy to install with screws or double-sided tape
- Supports encryption modes S0, S2 Authenticated Class,
S2 Unauthenticated Class
Protocol Z-Wave, 868,4 MHz
Power 1 x CR2450 battery
Operating temperature 0 – 40°C
Relative humidity 8% – 80%
Range Up to 20 meters(depending on surroundings)
IP class IP 20
Size (LxWxH) 71,2 x 71,2 x 13,6 mm
Explorer Frame Support Yes
Device Type Wall controller
Generic Device Class Switch Remote
Specific Device Class Switch Remote Multilevel
Approvals CE, RoHS 2011/65/EU
The product must be installed in accordance with current version of the installation guide and national building codes. See the installation guide for further information.